Assembly of the Solar cell
Steps
15
Difficulty
2/5
Drill a hole for the cables at the position shown in figure 2
Right position for drilling
Drill completely through the roof
Fed the solar cell cables through the drilled hole and seal up the hole
For mounting the solar cells we used sheet metal
Bend the sheet metal to the correct angle
Sheet metal for roof bolting
Holes for roof bolting
Screw to roof
Screw to roof (rear view)
The same four times
Drill a hole to attach the solar cells as shown in Figure 14
Attach solar cells
Attach solar cells
Because of the small roof we attached two stanchions to the front